Engineering & custom coils
Most of what we ship is wound to a customer drawing. Tell us the space, the force or field you need, and the volume; we work back to wire, turns and process.
Capability envelope
The ranges we wind in production today. Outside them, ask anyway: several current parts started as exceptions.
| Wire diameter | 0.012 – 1.0 mm |
|---|---|
| Coil outline | 1.5 – 80 mm |
| Turns | 2 – 12,000 |
| Window tolerance | down to ±0.02 mm |
| Resistance tolerance | down to ±3% |
| Inductance tolerance | down to ±2% |
| Wire types | Self-bonding, litz, CCA, rectangular, silver-plated |
| Operating temperature | −40 to +180 °C (wire class up to 220) |
| Terminations | Laser strip, resistance weld, pins, FPC, over-moulding |
Ways to work with us
OEM to drawing
You own the design. We build to your drawing and specifications.
ODM / co-design
You give us the requirement. We design the coil or module, then build it under your brand.
Platform + customization
Start from a validated part or module and change dimensions, terminations or housing.
Development process
Typical timing for a new coil with existing wire and bobbin materials.
Review
Drawing and DFM feedback
Quote
Price tiers, tooling, lead time
Prototype
Fixtures, first articles, FAI report
Validate
Reliability and capability checks
Ramp
Pilot run, then mass production
Common questions
- Can we sign an NDA before sending drawings?
- Yes. Tick the confidentiality option on the form and we send our NDA before opening your files.
- How are development costs handled?
- With existing wire and bobbin materials there is usually only a fixture charge, refundable against production orders. New bobbin tooling is quoted separately.
- Do you take lower-volume programmes?
- Yes. Samples and small batches are wound to drawing; the minimum order depends on whether new fixtures are needed.
Start an engineering request
Upload a drawing or describe the requirement. You will hear from an engineer, not a call centre.