Resources
Technical notes and company news, written by the people who wind the coils.
- News
Our workshop: 50+ Nittoku winding machines and 20 million coils a month
A short profile of where our coils are made: 1,800 m², more than 90 people, more than 50 winding machines and more than 30 supporting machines.
- Technical notes
Nanocrystalline or ferrite: choosing the shield for a thin wireless receiver
The shield behind a receiver coil guides the field and keeps it out of the battery. Nanocrystalline sheet does that job in a fraction of the thickness of ferrite.
- Technical notes
How to specify a VCM coil so the first sample is right
Seven values decide whether a voice-coil-motor coil fits, moves evenly and survives reflow. Put them on the drawing and you can skip a sampling round.
- Technical notes
Orthocyclic versus random winding: what changes in the part
Orthocyclic winding fills up to 90.7% of the winding cross-section with wire. Here is what that buys you, and when random winding is the better call.
- Technical notes
Wireless charging transmitter coils: what drives efficiency and heat
Litz strand size, the shield behind the coil, magnet alignment and the real stack-up all change how a transmitter coil performs. What to decide, and why.
- Technical notes
Self-bonding wire: hot air, solvent or current?
Bobbinless coils hold their shape because the wire bonds to itself. The bonding method affects strength, cycle time and how the coil behaves in reflow.




