
VCM coils
AW-VCM-CW0940Carrier-wound AF coil, 9.4 mm
Autofocus coil wound directly onto the octagonal lens carrier, no separate coil to place.
- Carrier across flats
- 9.40mm
- Height
- 2.20mm
- Wire, self-bonding
- 0.040mm
- DC resistance @20 °C
- 14.0 ±5%Ω
Specifications
| Carrier across flats | 9.40mm |
|---|---|
| Lens bore | M6.6 × 0.2 |
| Height | 2.20mm |
| Winding height | 1.00mm |
| Wire | 0.040 mm self-bonding |
| DC resistance @20 °C | 14.0 ±5%Ω |
| Operating temp. | −30 to +85°C |
Values are typical at 20 °C unless stated. Tolerances can be tightened on request.
About this part
The coil is wound straight onto the moulded lens carrier and terminated on its own posts, so the module maker receives one part instead of a carrier, a coil and an assembly step. The winding sits between two flanges and is held to ±0.02 mm on the outside, which keeps the magnet gap even all the way round.
Every carrier is tested for resistance, inductance and layer short, and the thread is gauge-checked before packing.
What we can change
Carrier from your mould or ours, wire 0.030–0.060 mm, winding height, terminal posts.
Ask an engineerDocuments
Questions buyers ask
- What is the MOQ for AW-VCM-CW0940?
- Samples are available. The production MOQ depends on the part and on whether new fixtures are needed; tell us your expected volume.
- How long do AW-VCM-CW0940 samples take?
- It depends on whether new fixtures are needed. We confirm the lead time with the quotation, based on your drawing.
- Can AW-VCM-CW0940 be customized?
- Carrier from your mould or ours, wire 0.030–0.060 mm, winding height, terminal posts.
- What equipment is it made on?
- In our own workshop, on more than 50 winding machines (most of them Nittoku machines imported from Japan), with soldering, visual inspection and quality-testing machines.


