Precision coils, wound on Japanese Nittoku machines

One in ten camera autofocus coils in the world is wound here.

VCM, air-core, bobbin and wireless charging coils, linear motors and chargers. Built to your drawing and measured one by one.

 coils so far today at full capacity (estimate)

AW-VCM-AF0806 autofocus coil. 8.00 × 6.00 × 0.50 mm, about 140 turns of 0.050 mm self-bonding wire.

AW-VCM-AF0806 autofocus coil. 8.00 × 6.00 × 0.50 mm, about 140 turns of 0.050 mm self-bonding wire.

Coils inside phones from the world’s leading brands

  • Samsung
  • Apple
  • Xiaomi
  • OPPO
  • vivo
  • Transsion
  • Google
Autofocus coil under magnification. Each ridge is a single turn.

Under magnification

The finest wire we wind in production.

Six times finer than a human hair, laid turn by turn in orthocyclic order, so every coil has the same window, height and resistance as the one before it.

Human hairabout 70 µm
Our finest wire12 µm

Autofocus coil under magnification. Each ridge is a single turn.

Six families, one winding platform.

One workshop, one team and one quality system for every family, so a programme can move between them without starting over.

All parts (21)

20,000,000 coils a month

20 million coils a month. Every one of them tested.

A production tray of autofocus coils
  1. Winding nozzle laying wire onto a bobbin

    01Wind

    More than 50 winding machines, most of them Nittoku machines imported from Japan, lay each coil turn by turn under controlled tension.

  2. Cross-section of an orthocyclic winding

    02Bond

    Self-bonding enamel fuses the turns into a solid coil with no bobbin. Orthocyclic packing fills up to 90.7% of the winding area with wire.

  3. 100%

    03Test

    More than 30 supporting machines handle soldering, tray loading, visual inspection, automated assembly and quality testing.

coils a month, all types
20M
winding machines, mostly Nittoku
50+
supporting machines
30+
m² workshop
1,800
employees
90+

Manufacturing and quality

From drawing to mass production in about fourteen weeks.

Typical timing for a new coil that uses existing wire and bobbin materials. Bars show the usual range.

  1. Review

    Drawing and DFM feedback

  2. Quote

    Price tiers, tooling, lead time

  3. Prototype

    Fixtures, first articles, FAI report

  4. Validate

    Reliability and capability checks

  5. Ramp

    Pilot run, then mass production

Exploded view of the Qi2 charger module

From bare coil to finished charger.

Because we wind the coils ourselves, we can supply any layer of the stack, or the whole module under your brand.

  1. 1Magnet ring

    N52, 18 segments, aligned to the Qi2 magnetic profile.

  2. 2Transmitter coil

    105 × 0.08 mm litz wire, 6.3 µH, Q ≥ 75.

  3. 3Ferrite shield

    Mn-Zn, 0.9 mm. Sets the floor for Q and keeps heat off the board.

  4. 4Controller board

    WPC-qualified design, USB-C PD input, foreign-object detection.

See the Qi2 module

Assessing us as a supplier?

Certificates, capacity, equipment and the facts your qualification team will ask for, on one page.

Open the supplier overview
  • ISO 9001Quality management system
  • RoHSRoHS-compliant materials

Notes from the winding floor

In short

What does this company make?
Jinghong Technology manufactures VCM coils, air-core coils, bobbin coils, wireless charging coils, linear motors and wireless chargers.
How much can it make?
Capacity is about 20 million coils a month across all types. About 10% of voice-coil-motor (VCM) coils shipped worldwide are wound in its workshop.
What equipment does it use?
A 1,800 m² workshop with more than 90 employees, more than 50 winding machines (most of them Nittoku machines imported from Japan) and more than 30 machines for soldering, tray loading, visual inspection, automated assembly and quality testing.
Does it make custom coils?
Yes. Most parts are wound to customer drawings under OEM or ODM terms. The quality management system is certified to ISO 9001 and materials are RoHS compliant.

Send a drawing. An engineer replies within two working days.

PDF, STEP or a sketch. Every file can be covered by NDA before anyone opens it.

Jinghong Technology | Precision coil manufacturer