
Wireless charging coils
AW-WC-DT7650Dual-coil transmitter, 76 × 50 mm
Two overlapping Tx coils on one ferrite sheet, for a wider free-placement area.
- Outline
- 76 × 50mm
- Thickness
- 2.20mm
- Litz wire
- 60 × 0.08mm
- Inductance per coil @100 kHz
- 6.3 ±5%µH
Specifications
| Outline | 76 × 50mm |
|---|---|
| Thickness | 2.20mm |
| Litz wire | 60 × 0.08 mm |
| Inductance per coil @100 kHz | 6.3 ±5%µH |
| Standard | Qi BPP |
Values are typical at 20 °C unless stated. Tolerances can be tightened on request.
About this part
Two litz coils overlap on a single Mn-Zn ferrite sheet so the phone charges anywhere across the pad. Leads exit together under Kapton for a clean solder run to the board.
Used in
Documents
Questions buyers ask
- What is the MOQ for AW-WC-DT7650?
- Samples are available. The production MOQ depends on the part and on whether new fixtures are needed; tell us your expected volume.
- How long do AW-WC-DT7650 samples take?
- It depends on whether new fixtures are needed. We confirm the lead time with the quotation, based on your drawing.
- Can AW-WC-DT7650 be customized?
- Coil overlap, ferrite thickness, lead length and termination.
- What equipment is it made on?
- In our own workshop, on more than 50 winding machines (most of them Nittoku machines imported from Japan), with soldering, visual inspection and quality-testing machines.


