
Wireless charging coils
AW-WC-RX43Receiver coil on nanocrystalline sheet, Ø43 mm
Our thinnest receiver: litz coil on a nanocrystalline magnetic sheet, under 0.5 mm in total.
- Coil outer diameter
- 43.0mm
- Total thickness
- 0.42mm
- Inductance @100 kHz
- 8.5 ±5%µH
Specifications
| Coil outer diameter | 43.0mm |
|---|---|
| Coil inner diameter | 18.0mm |
| Total thickness | 0.42mm |
| Inductance @100 kHz | 8.5 ±5%µH |
| Shield | Nanocrystalline, 2 layers |
| Rated power | 15W |
Values are typical at 20 °C unless stated. Tolerances can be tightened on request.
About this part
Nanocrystalline sheet carries far more flux per micron than ferrite, so the shield can be a fraction of the thickness for the same coupling and heat. We laminate and slit the sheet ourselves, wind the coil flat and bond it on, which is how the whole receiver stays under 0.5 mm.
The flat leads leave through a notch in the sheet, so nothing sits proud of the coil face.
What we can change
Sheet outline and layers, coil diameter, NFC or MST loop, lead length and finish.
Ask an engineerUsed in
Documents
Questions buyers ask
- What is the MOQ for AW-WC-RX43?
- Samples are available. The production MOQ depends on the part and on whether new fixtures are needed; tell us your expected volume.
- How long do AW-WC-RX43 samples take?
- It depends on whether new fixtures are needed. We confirm the lead time with the quotation, based on your drawing.
- Can AW-WC-RX43 be customized?
- Sheet outline and layers, coil diameter, NFC or MST loop, lead length and finish.
- What equipment is it made on?
- In our own workshop, on more than 50 winding machines (most of them Nittoku machines imported from Japan), with soldering, visual inspection and quality-testing machines.


