
Wireless charging coils
AW-WC-MPP50Qi2 MPP transmitter coil, Ø50 mm
15 W magnetic power profile Tx coil with ferrite and N52 magnet ring.
- Outer diameter
- 50.0mm
- Assembly thickness
- 3.10mm
- Litz wire, × 0.08
- 105mm
- Inductance @100 kHz
- 6.3 ±5%µH
Specifications
| Outer diameter | 50.0mm |
|---|---|
| Inner diameter | 20.0mm |
| Assembly thickness | 3.10mm |
| Litz wire | 105 mm × 0.08 |
| Inductance @100 kHz | 6.3 ±5%µH |
| Q @100 kHz | ≥ 75 |
| Standard | Qi2 MPP (BPP compatible) |
Values are typical at 20 °C unless stated. Tolerances can be tightened on request.
About this part
Litz-wire Tx coil assembled with a Mn-Zn ferrite plate and segmented magnet ring that meets the Qi2 alignment profile. Supplied coil-only or as a tested sub-assembly ready for the charger PCB.
Used in
Documents
Questions buyers ask
- What is the MOQ for AW-WC-MPP50?
- Samples are available. The production MOQ depends on the part and on whether new fixtures are needed; tell us your expected volume.
- How long do AW-WC-MPP50 samples take?
- It depends on whether new fixtures are needed. We confirm the lead time with the quotation, based on your drawing.
- Can AW-WC-MPP50 be customized?
- Magnet strength, ferrite thickness, lead length and terminal, NTC.
- What equipment is it made on?
- In our own workshop, on more than 50 winding machines (most of them Nittoku machines imported from Japan), with soldering, visual inspection and quality-testing machines.


