
Wireless charging coils
AW-WC-TT9850Three-coil transmitter, 98 × 50 mm
Two coils side by side and a third bridging them, for a large free-placement charging area.
- Outline
- 98 × 50mm
- Thickness
- 3.10mm
- Litz wire
- 60 × 0.08mm
- Inductance per coil @100 kHz
- 6.3 ±5%µH
Specifications
| Outline | 98 × 50mm |
|---|---|
| Thickness | 3.10mm |
| Litz wire | 60 × 0.08 mm |
| Inductance per coil @100 kHz | 6.3 ±5%µH |
| Standard | Qi BPP |
Values are typical at 20 °C unless stated. Tolerances can be tightened on request.
About this part
The three-coil array covers a phone placed almost anywhere on the pad. Coils are wound, stacked and bonded to the ferrite in one fixture, so their positions match the controller firmware every time.
Used in
Documents
Questions buyers ask
- What is the MOQ for AW-WC-TT9850?
- Samples are available. The production MOQ depends on the part and on whether new fixtures are needed; tell us your expected volume.
- How long do AW-WC-TT9850 samples take?
- It depends on whether new fixtures are needed. We confirm the lead time with the quotation, based on your drawing.
- Can AW-WC-TT9850 be customized?
- Array layout, ferrite outline, lead exit and length.
- What equipment is it made on?
- In our own workshop, on more than 50 winding machines (most of them Nittoku machines imported from Japan), with soldering, visual inspection and quality-testing machines.


